Simple Questions Simple Answers - Page 594
Forum Index > Tech Support |
Orcasgt24
Canada3238 Posts
| ||
micronesia
United States24342 Posts
Microcenter tested my psu for free, identified voltage issues with it, and I replaced it. I also bought a small UPS. My computer seems to be working with the new PSU. One more question: Is it normal for a red LED to light up on the motherboard (bottom right, near the devices labeled BIOS_A and BIOS_B) when you are starting your computer? It is on for 5-10 seconds, then it turns off and the OS boots... | ||
OsaX Nymloth
Poland3244 Posts
| ||
Danglars
United States12133 Posts
For a couple weeks now, on my phone moving between pages of a long thread, it interprets the link as a number to call. Thankfully next/previous still work fine so there's a workaround next-next prev-prev, so this is more of a annoyance than a real problem. Also the buttons format with a second box around them which didn't use to happen. Anyways, wanted to see if this was happening for others before dropping by website feedback. | ||
Yurie
11533 Posts
I found Go-Mobile for FF but it is no longer maintained and reviews say it is no longer working properly. | ||
Ropid
Germany3557 Posts
| ||
Yurie
11533 Posts
On October 25 2016 02:51 Ropid wrote: Is that "reader view" button in the Firefox location bar not working for those web novels you talk about? It doesn't appear on all pages. Try http://www.xianxiaworld.net/A-Thought-Through-Eternity/1002104.html and increase zoom to 300% to see an example. That specific page allows changing font and so on through scripts if one has javascript enabled but still the same issue of fixing things for each site when the mobile version works fine. Mobile version for comparison: http://m.xianxiaworld.net/A-Thought-Through-Eternity/1002104.html All pages are possible to fix using stylish or reader mode but mobile mode is easier and works on most pages. The second big problem with reader is that it does not support hotkeys until next version is released (2 weeks so I can wait). Making reading from a distance a bit bothersome, which is the basis of why I wanted it from the start. Clicking the reading icon is hard when you can hardly see the mouse pointer/icon to click. Thank you for the suggestion though. I hadn't considered it after the lacklustre first release of reader for FF, it seems much better now and is getting so in future patches as well. Long term it will probably solve my problem. | ||
mantequilla
Turkey773 Posts
| ||
Yurie
11533 Posts
On October 25 2016 16:57 mantequilla wrote: maybe user agent switcher addon? Thank you, that does exactly what I wanted. Sadly some pages don't switch version but that is up to their programming (doing other checks or none at all). | ||
Djzapz
Canada10681 Posts
My motherboard is an ASUS P8P67 Pro in LGA1155, I'm using the Intel SATA ports, so it's the onboard RAID controller or whatever. | ||
Craton
United States17153 Posts
I'm assuming you mean a Windows extended drive though, since you're talking about connecting it to a SATA port. I've done it fine with mirrored drives, so I don't see why extended would be any different. I'm not 100% sure about if you changed to an entirely SATA different controller or put them on two different controllers. I would expect software RAID not to care, but it might be a factor. | ||
Djzapz
Canada10681 Posts
On October 27 2016 14:17 Craton wrote: The physical port shouldn't matter. They're designed for you to be able to replace the RAID controllers, after all. I'm assuming you mean a Windows extended drive though, since you're talking about connecting it to a SATA port. I've done it fine with mirrored drives, so I don't see why extended would be any different. I'm not 100% sure about if you changed to an entirely SATA different controller or put them on two different controllers. I would expect software RAID not to care, but it might be a factor. My motherboard has 8 SATA ports, 6 of them are on Intel (4x SATA2 and 2x SATA3 but I believe they're shared on the same controller) and 2 SATA3 ports on a Marvel controller which is separate. Apparently the Marvel SATA3 controller is slower so I'd like to use the Intel one instead. My current setup is weird: Port 0, SATA3, Intel: SATA3 SSD Port 1, SATA3, Intel: First RAID0 HDD Port 2, SATA2, Intel: Second RAID0 HDD Port 3, SATA2, Intel: Single data drive Port 4 and 5, SATA2, Intel: Free Port 6 and 7, SATA3, Marvel: Free As you can see, one of my RAID0 drives is populating a SATA3 port by Intel and I'd like to recuperate to install a second SATA3 SSD on my Intel controller. So basically I'm wondering, if I disconnect my RAID0 HDD from port1 and move it over to port 4 which is handled by the same controller, will the thing automatically detect it, or will the RAID0 fall apart and I'll lose all the data? I expect it's smart enough to pair them automatically but I wouldn't want to assume so... And I don't know that it's a Windows extended drive, I don't think so, it's all managed by the motherboard I believe. | ||
Craton
United States17153 Posts
| ||
Djzapz
Canada10681 Posts
On October 28 2016 09:44 Craton wrote: Ah, I guess that'd be considered hardware RAID with the controller embedded into the mobo. My money is on it working but I can't say for sure. Alright ty, I'll do some more research Edit: Didn't do research, just made the swap successfully. The drives were automatically detected as part of the array so now my PC is ready to receive a brand new SATA3 SSD | ||
MarlieChurphy
United States2063 Posts
Yesterday I noticed that all the fans on my PC stopped spinning. It's working fine and doesn't seem to be running hot either. I turned it off and left it off just to be safe while I was gone. When I came home after several hours I booted up and still no fans. Installed CPUID HW monitor and confirm no fans spinning and nothing was over 35C° Anyone got any idea why they would all stop at the same time? | ||
OsaX Nymloth
Poland3244 Posts
On October 28 2016 17:06 MarlieChurphy wrote: Do I need to make a thread or just post here? Yesterday I noticed that all the fans on my PC stopped spinning. It's working fine and doesn't seem to be running hot either. I turned it off and left it off just to be safe while I was gone. When I came home after several hours I booted up and still no fans. Installed CPUID HW monitor and confirm no fans spinning and nothing was over 35C° Anyone got any idea why they would all stop at the same time? Did you update your BIOS or motherboard drivers lately? Could be the fans stopped spinning because they're not needed (it's not hot enough for them to turn on). You can easily confirm this by launching some software to monitor the temperatures and then launching anything like benchmark or some game. If the temps are above 50C and still no fans are spinning, then you're right to worry. | ||
micronesia
United States24342 Posts
| ||
Cyro
United Kingdom20157 Posts
| ||
Craton
United States17153 Posts
| ||
Grettin
42379 Posts
| ||
| ||